Wiring DiagramService Notice or Precautions for Steering System
In case of removing steering gear assembly, make the final tightening with grounded and unloaded vehicle condition, and then check wheel alignment.
Observe the following precautions when disassembling.
Before disassembly, thoroughly clean the outside of the unit.
Disassembly should be done in a clea ...
How to Erase Permanent Dtc
When a DTC is stored in ECM
When a DTC is stored in ECM and MIL is ON, a permanent DTC is erased with MIL shutoff if the same malfunction is not detected after performing the driving pattern for MIL shutoff three times in a raw.
*1: When the same malfunction is detected in two consecutive trips, ...
Connecting Rod Bearing
DESCRIPTION
Selection points Selection parts Selection items Selection methods Between cylinder block and crankshaft Main bearing Main bearing grade
(bearing thickness) Determined by match of cylinder block bearing housing grade (inner diameter of housing) and crankshaft journal grade (outer ...