Nissan Armada 2025-2026 Service and Repair Manual: Road Wheels & Tires — Wiring Diagram

Special Service Tool

Tool number (TechMate No.) Tool name Description — (J-50190) Signal tech II Activate and display TPMS tire pressure sensor IDs Display tire pressure reported by the TPMS tire pressure sensor Read ...

Tire Pressure Monitoring System

...

Other materials:

Hammering
Elongation of aluminum alloy during hammering will be greater than with steel plates. Therefore, a wooden or plastic hammer should be used with a softer blow to prevent stretching and work hardening of panels. Observe the following in case body filler is applied after hammering. Apply wash primer a ...

Exploded View
Exhaust gas/outside odor detecting sensor Active grille shutter : Clip : Pawl : Vehicle front ...

Inspection
CRANKSHAFT END PLAY Measure the clearance between thrust bearings and crankshaft arm when crankshaft is moved fully forward or backward with a dial indicator. Standard and limit : Refer to CylinderBlock. If the measured value exceeds the limit, replace thrust bearings, and measure again. If it s ...