Nissan Armada 2025-2026 Service and Repair Manual: Unit Parameter Writing
Transfer control unit replacing
Transfer assembly replacing
Transfer control actuator replacing
Transfer range position sensor replacing
Transfer cam position sensor replacing
Transfer case component parts disassembling
NOTE:
For the work procedure, refer to Work Procedure.
Work Procedure
WRITING THE REQUIRED INFORMATION FOR CONTROL UNIT REPLACEMENT
With CONSULT
Ignition switch ON.
Select "AWD/4WD".
Select "Replace ECU".
Perform the work according to the procedure displayed in CONSULT. ...
Work Procedure
WARNING:
UNIT CHARACTERISTIC VALUE CONFIRMATION
: Side surface : Top surface
NOTE:
There is space on the top to check with the camera.
>>
GO TO 2.
WRITING UNIT PARAMETER
With CONSULT
Ignit ...
Other materials:
Diagnosis Procedure
CHECK DOOR SWITCH
Check door switch.
Refer to Component Function Check.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK UNLOCK SENSOR
Check unlock sensor.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
...
Removal and Installation
WARNING:
REMOVAL
Remove transfer assembly from vehicle. Refer to Removal and Installation.
Remove input oil seal.
CAUTION:
Never damage the front case and input shaft.
INSTALLATION
Note the following, and install in the reverse order of removal.
Install input oil seal with a drift (A) (commercial s ...
Unit Parameter Writing
After working the following, transfer unit parameter must be written to transfer control unit.
Transfer control unit replacing
Transfer assembly replacing
Transfer control actuator replacing
Transfer range position sensor replacing
Transfer case component parts disassembling
NOTE:
Write characterei ...
0.0067