Description
Wastegate valve closed position learning is a function of ECM to learn the fully closed position of the wastegate valve by monitoring the wastegate valve position sensor output signal. It must be performed under any of the following conditions.
Work Procedure
PERFORM WASTEGATE VALVE CLOSED POSITION LEARNING VALUE CLEAR
With CONSULT
-
On the CONSULT screen, select “ECM” >> “Work support” >> “WASTEGATE ACTUATOR POSI LEARN VALUE CLEAR”.
-
Touch “Start”.
-
Check that “COMPLETED” is displayed. If “COMPLETED” is not displayed, repeat the above.
>>
GO TO 2.
PERFORM NEW CLOSED POSITION LEARNING
With CONSULT
-
Check that the engine is cold [coolant temperature : 50 °C (122 °F) or less].
-
On CONSULT screen, select “ECM” >> “Data monitor” >> "Wastegate valve closed position learning bank 1" and "Wastegate valve closed position learning bank 2"
Check that “INCMP” is displayed.
-
Ignition switch OFF and wait at least 10 seconds.
-
Ignition switch ON and wait at least 10 seconds.
Is “CMPLT” displayed on CONSULT screen?
YES>>END
NO>>Check that the engine is cold [coolant temperature: 50 °C (122 °F) or less] And then, perform step 3 and 4 again.
Other materials
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...
Cab Mounting Insulator
Exploded View
Cab mounting insulator (1st)
Cab mounting insulator (2nd)
Cab mounting insulator (3rd)
Cab mounting insulator (4th)
Front bumper cross member
Rear engine mounting cross member
Chipping protector
: N·m (kg-m, ft-lb)
Removal and I ...
Around View Monitor Control Unit
Removal and Installation
REMOVALRemove front seat LH. Refer to Removal and Installation.
Remove front kicking plate inner LH and rear kicking plate inner LH. Refer to Removal and Installation.
Remove dash side finisher LH. Refer to Removal and Installation.
Remove center pillar lower garnish LH. Ref ...