| Item | Standard |
|---|---|
| Axial end play | 0.05 mm (0.002 in) or less |
Drive ShaftLocation of Plastic Parts
EXTERIOR
FOR PRO-4X GRADE
Component Material Component Material Door mirror cover ABS Rear spoiler Upper PC + ABS Door mirror finisher ABS Lower ASA Door mirror housing assembly ABS Roof antenna Without ProPILOT Assist 2.1 models Inner cover PC + ABS Door mirror base cover ABS ...
Removal and Installation
WARNING:
REMOVAL
The ignition switch OFF.
CAUTION:
Wait for 60 seconds after the ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation
Disconnect the transfer control actuator connector .
Remove harness clip .
Remove transfer control actuator mounting bolt ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...