WITHOUT DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
Except for Canada
| Item | Standard | |
|---|---|---|
| Wheel size | 18 inch | 20 inch |
| Front (Hf) | 929 mm (36.57 in) | 937 mm (36.89 in) |
| Rear (Hr) | 936 mm (36.85 in) | 945 mm (37.20 in) |
| ||
Measure value under unladen* conditions.
For Canada
| Item | Standard | |
|---|---|---|
| Wheel size | 18 inch | 20 inch |
| Front (Hf) | 929 mm (36.57 in) | 937 mm (36.89 in) |
| Rear (Hr) | 936 mm (36.85 in) | 944 mm (37.17 in) |
| ||
Measure value under unladen* conditions.
WITH DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
| Item | Standard | |
|---|---|---|
| Wheel size | 20 inch | 22 inch |
| Front (Hf) | 928 mm (36.54 in) | 928 mm (36.54 in) |
| Rear (Hr) | 935 mm (36.81 in) | 936 mm (36.85 in) |
| ||
Measure value under unladen* conditions.
Ball JointRemoval and Installation
REMOVAL
Remove the instrument lower panel LH. Refer to Removal and Installation.
Remove parking brake switch mounting screws , and then remove parking brake switch .
: Instrument lower panel LH
INSTALLATION
Install in the reverse order of removal. ...
ECM : Removal & Installation
CAUTION:
Perform ADDITIONAL SERVICE WHEN REPLACING ECM. Refer to Work Procedure.
REMOVAL
With ProPILOT Assist 2.1
Disconnect the ECM harness connectors.
Remove ECM mounting nuts ( ) and remove ECM from the bracket.
Remove bracket mounting nuts ( ) and remove the bracket .
Without ProPILOT Ass ...
System maintenance
Example
Basic information
The two radar sensors A for the I-BSI system are located near the rear bumper.
Always keep the area near the radar sensors clean.
The radar sensors may be blocked by temporary ambient conditions such as snow,
splashing water, mist or fog.
The blocked condition ma ...