Nissan Armada 2025-2026 Service and Repair Manual: Service Data and Specifications (sds)
Wheel Alignment
WITHOUT DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
Item Standard Camber
Degree minute (Decimal degree) Minimum −0°35′ (−0.58°) Nominal −0°05′ (−0.08°) Maximum 0° ...
Other materials:
Comparison of Pulling Methods
(1) HYDRAULIC RAM TYPE
In this method, the pressing force of a hydraulic ram is converted to a pulling force by a chain.
Pulling points on the body may be added easily, and there is more freedom to select the pulling direction.
The pulling direction changes during pulling.
Difficult to simultaneous ...
Removal and Installation
WARNING:
REMOVAL
Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation.
CAUTION:
Never depress brake pedal while brake caliper is removed.
Remove wheel sensor and harness connector. Refer to Removal and Installation.
CAUTION:
Never pull on wheel sensor harness.
Set suitable jack unde ...
Adjustment
WARNING:
CAMBER, CASTER
Adjust with the front/rear side adjusting bolts on the lower link.
: Vehicle front
See the following table for the amount of cam bolt scale movement and the variation of camber and caster.
CAUTION:
Align the adjusting bolt cutout with the stamp of lower link bracket. ...
0.0057