Click link to Wiring Diagram.
Basic InspectionRemoval and Installation
REMOVAL
Disconnect the 12V battery cable from the negative terminal.
Remove 12V sub battery (lithium ion battery). Refer to Removal and Installation.
Check that there is no voltage (Approx. 0 V) between power network separate relay terminal and ground and power network separate relay terminal and gr ...
Diagnosis Procedure
CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY AND GROUND CIRCUIT
Check power window main switch power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK FRONT POWER WINDOW MOTOR ( ...
Removal and Installation
REMOVAL
Remove front heater & cooling unit assembly and front blower unit assembly. Refer to Removal and Installation.
Disconnect front mode door motor harness connector .
Remove fixing screws , and then remove front mode door motor.
INSTALLATION
Install in the reverse order of removal. ...