Click link to Wiring Diagram.
Basic InspectionRefilling
WARNING:
Recommended fluid and fluid capacity Refer to Fluids and Lubricants.
CAUTION:
Use only recommended A/T fluid. Never mix with other A/T fluid.
Lift up the vehicle.
When the drain plug is installed to the oil pan, remove it with OFT position change wrench (SST: NI-52972–2).
Insert OFT ...
Removal & Installation
WARNING:
REMOVAL
Remove engine cover. Refer to Removal and Installation.
Remove ignition coil. Refer to Removal and Installation.
Remove spark plug with a spark plug wrench (commercial service tool).
: 14 mm (0.55 in)
INSTALLATION
Install in the reverse order of removal. ...
Work Procedure
When the following parts are replaced or removed, be sure to perform the specified incidental work in order to operate the system normally.
PREPARATION BEFORE CALIBRATION
Place the vehicle on a level surface.
Adjust all tire pressures to the specified pressure. Refer to TIRE AIR PRESSURE : Service D ...