Diagnosis Procedure
CHECK AUTO ANTI-DAZZLING MIRROR CIRCUIT
Check auto anti-dazzling mirror circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
REPLACE GLASS MIRROR
-
Replace glass mirror. Refer to Removal and Installation.
-
Confirm the operation after replacement.
Is the inspection result normal?
YES>>INSPECTION END
NO>>GO TO 3.
REPLACE AUTO ANTI-DAZZLING INSIDE MIRROR
-
Replace auto anti-dazzling inside mirror. Refer to Removal and Installation.
- Confirm the operation after replacement.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials
Precautions for Pop up Engine Hood
PRECAUTIONS FOR POP UP ENGINE HOOD : Precautions
WARNING:
Always observe the following items for preventing accidental activation.
Before removal or installation of the pop-up engine hood and harness, always OFF the ignition switch, disconnect the battery negative terminal, and wait for 3 minutes ...
Fusible Link Inspection
How To Check
With ProPILOT ASSIST 2.1A melted fusible link can be detected by visual inspection. If its condition is questionable, use circuit tester or test lamp.
Fusible link
CAUTION:
If fusible link should melt, it is possible that critical circuit (power supply ...
Diagnosis and Repair Workflow
Work flow
OVERALL SEQUENCE
Reference 1···On Board Diagnosis Function.
Reference 2···DTC Index.
Reference 3···Component Function Check.
Reference 4···Diagnosis Procedure.
DETAILED FLOWOBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible ...