Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to Intelligent Key unit following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
NOTE:
Log in the network according to CONSULT guidance.
WORK END
Configration (intelligent Key Unit)
Vehicle specification needs to be written with CONSULT because it is not written after replacing the Intelligent Key unit.
The configuration requires network connection. CONSULT connects to network an ...
Calibration of Automatic Back Door Position Information
When the following work is performed, it is necessary to perform initial setting of automatic back door position information to operate automatic back door system. Refer to Work Procedure.
After remov ...
Other materials:
Removal and Installation
WARNING:
REMOVAL
Remove front bumper fascia. Refer to Removal and Installation.
Disconnect the harness connector from the distance sensor.
Mounting the distance sensor bracket Remove the bolts and remove the distance sensor bracket from the front bumper reinforcement.
Remove the distance sensor m ...
Work Procedure
REPLACE BCM
Replace BCM. Refer to Removal and Installation.
>>
GO TO 2.
WRITING Vehicle SPECIFICATION
Perform configuration (BCM). Refer to Description.
>>
GO TO 3.
PAIRING OF BCM AND INTELLIGENT KEY UNIT
CAUTION:
When before pairing of BCM and Intelligent Key unit, always writing ...
Exploded View
Bracket A/T assembly Bracket Transfer assembly Bracket : N·m (kg-m, ft-lb) ...
0.0055