Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
STEP 1
Select “AUTOMATIC BACK DOOR” using CONSULT.
Select “Reset auto back door status” of “WORK SUPPORT” mode.
Touch “Initialize” to erase automatic back door position information.
GO TO 2.
STEP 2
Fully close the back door manually.
>>GO TO 3.
STEP 3
Operate back door opener switch and perform automatic open operation.
>>GO TO 4.
STEP 4
The back door fully opens.
Check that automatic back door warning buzzer sounds normally.
Does automatic back door warning buzzer sound normally?
YES>>GO TO 5.
NO>>GO TO 2.
STEP 5
Fully close the back door.
>>WORK END
Calibration of Automatic Back Door Position Information
When the following work is performed, it is necessary to perform initial setting of automatic back door position information to operate automatic back door system. Refer to Work Procedure.
After remov ...
Other materials:
Removal and Installation
REMOVAL
Disengage hood lock control handle fixing pawl, and then remove hood lock control handle.
: Pawl
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
After installation, perform hood lock control inspection. Refer to Inspection.
After installa ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Warning/indicator lights (red)
Brake warning light
or
In the Nissan Armada, the brake warning light is a critical safety indicator
that helps monitor the condition of the braking system. When the ignition switch
is turned to the ON position, this light should illuminate briefly for a few seconds
and then turn off, ...
0.0067