Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
Description
When the automatic report function of the TCU is activated, the TCU locks the automatic report function after the automatic report. Therefore, it is necessary to release the lock on the TCU after the automatic report function of the TCU is activated.
Work Procedure
AUTOMATIC REPORT PREVENTION RELEASE
CONSULT Work support
Turn ignition switch ON.
Select "Automatic report prevention release" to unlock the automatic report prevention.
WORK END
Other materials:
Roof Rail
Work after roof is removed.
: Vehicle front : Drill φ8 mm (0.31 in) hole for the plug welding hole (ultra high strength steel). : Drill φ11 mm (0.43 in) hole for the plug welding hole (ultra high strength steel). : Weld the parts onto the back of the component part. : Welding method, the number o ...
Diagnosis Procedure
CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL UNIT
Check that DTC is not detected with automatic back door control unit.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to DTC Index.
CHECK TOUCH SENSOR LH
Check touch sensor LH.
Refer to DTC Diagnosis Procedure.
Is the inspecti ...
Connecting Rod Bearing
DESCRIPTION
Selection points Selection parts Selection items Selection methods Between cylinder block and crankshaft Main bearing Main bearing grade
(bearing thickness) Determined by match of cylinder block bearing housing grade (inner diameter of housing) and crankshaft journal grade (outer ...
0.0055