Work Procedure
TelematicsPrecautions For Harness Repair
CAN communication uses a twisted pair line. Be careful when repairing it.
Solder the repaired area and wrap tape around the soldered area.
NOTE:
A fray of twisted lines must be within 110 mm (4.33 in).
Bypass connection is never allowed at the repaired area.
NOTE:
...
Cut and Butt Joint Weld
Damages that are considered difficult to repair by frame straightening work, such as a deformed crash horn, may be restored by a butt joint weld only if the Service Manual and/or the Body Repair Manual instructs so.
As an example, the butt joint weld procedure for A60 is outlined below.
(1) CRASH HO ...
Removal and Installation
CAUTION:
Never bend the fixing pawl of rear armrest.
REMOVAL
Remove rear door finisher. Refer to Removal and Installation.
Disconnect rear power window switch harness connector.
Remove rear armrest fixing screws , and then remove rear armrest from rear door finisher .
: Pawl
Remove rear power ...