Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
PERFORM MAC KEY WRITING
Ignition switch ON.
Select "MAC Key writing" on "Work support" of "CHASSIS CONTROL" using CONSULT.
Touch "Write".
WORK END
Mac Kye Writing
When replacing chassis control module, it is necessary to write MAC key to chassis control module. Write MAC key to chassis control module according to "MAC Key writing" procedure of "CONSULT Operatio ...
Other materials:
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Work Procedure
CHOOSE METHOD
There are two ways of initialization method.
Which method do you choose?
With CONSULT>>
GO TO 2.
Without CONSULT>>
GO TO 3.
WITH CONSULT
With CONSULT
Ignition switch ON.Perform "Third seat LH position initialization" in "Work support" mode of "THIRD SEAT RH" using CONSUL ...
Service After Replacing or Removing Engine Parts
×:Applicable
Part name Service performed Service Manual item Reference Replacement Removal ECM × — Additional service when replacing ECM Refer to Work Procedure. Accelerator pedal position sensor × ×*1 Accelerator pedal released position learning Refer to Work Procedure. Electr ...
0.0056