NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Additional Service When Replacing Bcm

Nissan Armada 2025-2026 Service and Repair Manual / Electrical & Power Control / Body Control System / Additional Service When Replacing Bcm

Description

CAUTION:

  • When replacing the BCM, always replace it with a new one. The functions controlled by the BCM does not operate properly in case of reuse of the BCM from another vehicle.

  • When before pairing of BCM and Intelligent Key unit, always writing the BCM configuration. Or not doing so, BCM control function does not operate normally.

Perform the following operations when replacing BCM. For details, refer to Work Procedure.

AFTER REPLACEMENT

CAUTION:

When after replacing BCM, the following items must be performed. Or not doing so, BCM control function does not operate normally.

  • Writing vehicle specification

  • Pairing of BCM and Intelligent Key unit

  • Register of vehicle identification number

  • Writing MAC key

  • Tire pressure sensor ID registration

  • Remote engine start function activation

Work Procedure

REPLACE BCM

Replace BCM. Refer to Removal and Installation.

>>

GO TO 2.

WRITING vehicle SPECIFICATION

Perform configuration (BCM). Refer to Description.

>>

GO TO 3.

PAIRING OF BCM AND INTELLIGENT KEY UNIT

CAUTION:

When before pairing of BCM and Intelligent Key unit, always writing the BCM configuration. Or not doing so, BCM control function does not operate normally.

Perform the pairing of BCM and Intelligent Key unit. Press UNLOCK button of Intelligent Key.

>>

GO TO 4.

REGISTER OF vehicle IDENTIFICATION NUMBER

With CONSULT

  1. Select “VIN registration” of BCM (BCM) work support item.

  2. Refer to CONSULT and follow the on-screen instructions.

>>

GO TO 5.

WRITING MAC KEY

Perform MAC key writing. Refer to Description.

>>

GO TO 6.

TIRE PRESSURE SENSOR ID REGISTRATION

Perform the initialization and registration of tire pressure sensor ID. Refer to Description.

>>

GO TO 7.

REMOTE ENGINE START FUNCTION ACTIVATION

  1. Press the UNLOCK button of Intelligent Key.

  2. Press REMOTE ENGINE START button of Intelligent Key for 2 seconds.

  3. Release REMOTE ENGINE START button, and press REMOTE ENGINE START button of Intelligent key again within 3 seconds for 2 seconds.

>>

WORK END

    Other materials

    Vehicle load capacity
    Basic information Before operating a loaded Nissan Armada, always verify that the total vehicle weight does not exceed the specified Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). These critical limits are clearly indicated on the F.M.V.S.S./C.M.V.S.S. certificatio ...

    Rear Wheel Hub and Housing
    Inspection WARNING: Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System. MOUNTING INSPECTIONC ...

    Front Door Weather-Strip
    Removal and Installation REMOVALApply protective tape (A) to front door panel around front door weather-strip fixing clips for preventing damage. Disengage fixing clips on the reverse side of front door weather-strip using a remover tool (A). : Clip CAUTION: Never damage front door pane ...