Description
When each power window motor replaced, the initialization is necessary for normal operation of power window system. Refer to Work Procedure.
CAUTION:
The following specified operations cannot be performed under the non-initialized condition.
-
Auto-up operation
-
Anti-pinch function
Work Procedure
SYSTEM INITIALIZATION
Perform system initialization. Refer to Description.
>>
GO TO 2.
CHECK ANTI-PINCH FUNCTION
Check anti-pinch function. Refer to Description.
>>
END
Other materials
SAND mode
WARNING
When SAND mode is activated in the Nissan Armada, the Vehicle Dynamic Control
(VDC) system operates with reduced intervention. As a result, the system may not
react in the same way as it does in STANDARD mode. To minimize the risk of accidents,
always drive the Nissan Armada with caut ...
Precautions for Supplemental Restraint System (srs) Air Bag and Seat Belt Pre-Tensioner
PRECAUTIONS FOR SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG AND SEAT BELT PRE-TENSIONER : Precautions
The Supplemental Restraint System such as “AIR BAG� and “SEAT BELT PRE-TENSIONER�, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front p ...
Second Heated Seat System
Symptom Table
Symptom Possible causeInspection item
Second heated seat system does not operate
Display unit and rear A/C control operation does not operate
Fuse
Second seat heater power supply/ground/LIN signal circuit
Second seat cushion heater
Second seatback heater
A/C auto amp.
Check second ...