Description
The power steering warning lamp does not illuminate when the ignition switch is ON (lamp check).
Diagnosis Procedure
CHECK THE POWER STEERING WARNING LAMP
Perform trouble diagnosis for the power steering warning lamp system. Refer to Component Function Check.
Is the inspection result normal?
YES>>Check that the terminals and the connection of each connector are normal.
NO>>Repair/replace harness, connector, terminal, fusible link or fuse.
Other materials
Reservoir Tank Cap
Inspection
Check valve seat of reservoir tank cap.
: Metal plunger
Check if valve seat is swollen to the extent that the edge of the metal plunger cannot be seen when watching it vertically from the top.
Check if valve seat has no soil and damage.
Pull negative-pressure valve to ...
Srs Air Bag Warning Lamp Does Not Turn Off
Diagnosis Procedure
CHECK 12V BATTERY
Check 12V battery. Refer to Work Flow.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK AIR BAG FUSE
Check 10 A fuse [No. 5, located in fuse block (J/B)].
Is the inspection result normal?
YES&g ...
Front Door Module Assembly
Removal and Installation
REMOVALCAUTION:
Before removing, take a short memo/photo to remember door harness and cable layout.Remove front door glass. Refer to Removal and Installation.
Disconnect harness connectors , and then disengage harnesses fixing clips.
: Clip
Remove hole seals from fro ...