Work Procedure
CAUTION:
When after replacing audio amp, Configuration must be performed. Or not doing so, audio amp. control function does not operate normally.
REPLACE AUDIO AMP.
Replace audio amp. Refer to Removal & Installation.
>>
GO TO 2.
PERFORM AUDIO amp. CONFIGURATION
Perform audio amp. programming, according to “Replace ECU” of CONSULT Operation Manual. Refer to CONSULT Operation Manual.
>>
WORK END
Other materials
Unexpected Brake Pedal Reaction
Diagnosis Procedure
A malfunction of brake pedal feel (height or others) is detected when the brake pedal is depressed.CHECK AXLE
Check that there is no significant looseness of axle.
Front axle
2WD models: Refer to Inspection.
4WD models: Refer to Inspection.
Rear axle: Refer to Inspectio ...
Door Does Not Lock/unlock with One Touch Sensor and Intelligent Key
Description
All doors do not lock/unlock using one touch sensor and Intelligent Key.SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS) Door lock operation (remote keyless entry) Door lock operation (one touch sensor or request switch of front/rear/back door) or trunk/back door open operat ...
With Auto Anti-Dazzling Inside Mirror
Diagnosis Procedure
CHECK AUTO ANTI-DAZZLING MIRROR CIRCUIT
Check auto anti-dazzling mirror circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
REPLACE GLASS MIRROR
Replace glass mirror. Refer to Remo ...