Work Procedure
Description
When AV control unit is replaced, AV control unit configuration is required.
REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to Removal & Installation.
>>
GO TO 2
PERFORM AV CONTROL UNIT PROGRAMMING & CONFIGURATION
CONSULT
Perform AV control unit programming, according to “Replace ECU” of CONSULT Operation Manual. Refer to CONSULT Operation Manual.
CAUTION:
During programming, maintain the following conditions:
-
Ignition switch: ON
-
Electric load: OFF
-
Brake pedal: Not depressed
-
12V battery voltage: 12 – 13.5 V (Check the value displayed on the CONSULT screen.)
>>
GO TO 3
WRITE VIN DATA (AV CONTROL UNIT)
CONSULT work support
Perform “WRITE VIN (MANUAL INPUT)” to write VIN data.
>>
GO TO 4
CHECK NETWORK INITIAL SETTINGS
CONSULT Work Support
Select “Work Support” of “MULTI AV” and perform “Network initial settings”.
>>
WORK END
Other materials
Driving safety precautions
Your Nissan Armada is engineered to deliver confident performance both on paved
roads and in light off-road conditions. However, it is important to understand that
the Nissan Armada is primarily designed for recreational and everyday driving, and
not for extreme off-road environments. Avoid dr ...
Spindle Unit
Removal and Installation
CAUTION:
Perform work with 2 workers, because it is heavy weight.
Support back door with a proper material and use protective tape or shop cloth to protect back door and body from falling and damage when removing and installing spindle unit.
REMOVALDisconnect battery ca ...
Wireless Charger System Symptoms
Symptom Table
RELATED TO WIRELESS CHARGERMake sure the wireless charger is not in a deactivation condition before starting diagnosis. Refer to System Description. Symptoms Check items Possible malfunction location/Action to take
Wireless charging does not start
Ignition switch is not turned ON ...