Vehicle specification needs to be written with CONSULT because it is not written after replacing the chassis control module. For details the operation, refer to “CONSULT Operation Manual”.
Diagnostic Work Sheet
Work Procedure [After Replacing Chassis Control Module]Exploded View
Rear wiper motor Rear wiper blade Rear wiper arm Pivot seal : N·m (kg-m, in-lb) ...
Determining Various Conditions of the Collision
Size, shape, position, rigidity, etc. of the other vehicle involved in the collision
Speed of both vehicles at the time of collision
Collision angle and direction
Number of occupants and their positions at the time of collision
Size, shape, hardness, etc. of load in the vehicle
History of damaged po ...
Exploded View
Front output shaft Front oil seal Front case Snap ring Sprockets with chain Snap ring Rear case : Always replace after every disassembly. : N·m (kg-m, ft-lb) : Apply transfer fluid. : Apply Genuine Liquid Gasket, Loctite 598 or equivalent. ...