Nissan Armada 2025-2026 Service and Repair Manual: Additional Service When Replacing Occupant Detection System Control Unit
When replacing occupant detection system control unit or removing and installing passenger seat, always perform zero point reset so that occupant detection system is activated normally. Refer to Work Procedure.
Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to air bag diagnosis sensor unit according to "Replace ECU" in "CONSULT Operation Manual".
>>
GO TO 2
CHECK ALL ...
Work Procedure
PERFORM ZERO POINT RESET
Perform zero point reset. Refer to Description.
>>
WORK END ...
Other materials:
Diagnosis Procedure
CHECK GLASS LID
Check the following items.
Cracks, damage, or deformation of weather-strip.
Sticking of weather-strip.
Loose or missing glass lid mounting bolt.
Misalignment of glass lid. Refer to Adjustment.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the m ...
Change of System Mode
CAUTION:
When the following operations are performed, always use CONSULT, for performing "System mode change" of "Work support". Refer to Work Procedure.
×: Required —: not required
Procedure System mode change Removing/installing ABS actuator and electric unit (control unit) — Replacing ...
Removal and Installation
WARNING:
REMOVAL
Turn the ignition switch ON.
CAUTION:
Never start the engine.
Release the parking brake.
CAUTION:
If the brake cannot be released, release it manually. Refer to Diagnosis Procedure.
Turn the ignition switch OFF.
Disconnect 12V battery negative terminal. Refer to Removal and Instal ...
0.0056