Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure

Additional Service When Replacing Occupant Detection System Control Unit

When replacing occupant detection system control unit or removing and installing passenger seat, always perform zero point reset so that occupant detection system is activated normally. Refer to Work ...

Zero Point Reset

Zero point reset is an initializing procedure for occupant detection system that must be performed when replacing occupant detection system control unit or removing and installing passenger seat. If z ...

Other materials:

Configuration
Vehicle specification needs to be written with CONSULT because it is not written after replacing the ABS actuator and electric unit (control unit). The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT wr ...

Work Procedure
START Ignition switch ON. Check information display of the combination meter. Is Distance to Engine Oil Change displayed? YES>> GO TO 3. NO>> GO TO 2. SELECT OIL CONTROL SYSTEM MODE Push the Display next switch and select oil control system mode. >> GO TO 3. RESET ENGINE OIL D ...

RAB system limitations
WARNING The following limitations apply to the Rear Automatic Braking (RAB) system in the Nissan Armada. Failure to fully understand and follow these limitations may result in serious injury or even fatal accidents. When the Nissan Armada approaches an obstacle while the accelerator or b ...