CAUTION:
When the following operations are performed, always use CONSULT, for performing "System mode change" of "Work support". Refer to Work Procedure.
×: Required —: not required
| Procedure | System mode change |
|---|---|
| Removing/installing ABS actuator and electric unit (control unit) | — |
| Replacing ABS actuator and electric unit (control unit) | × |
| Removing/installing rear brake pad (When not pressing piston of rear brake caliper assembly) | — |
| Replacing rear brake caliper assembly | — |
| Removing/installing parking brake switch | — |
| Replacing parking brake switch | — |
Work Procedure
Work ProcedureRotation
WARNING:
Follow the maintenance schedule for tire rotation service intervals. Refer to General Maintenance.
When installing the wheel, tighten wheel nuts to the specified torque. Refer to ROAD WHEEL TIRE : Exploded View.
CAUTION:
When installing wheels, tighten them diagonally by dividing the work ...
Diagnosis Procedure
NOTE:
SYMPTOM TABLE 1 (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS)
No. Door lock operation (remote keyless entry) Door lock operation (request switch of front/rear door) or trunk/back door open operation (opener switch of trunk/back door panel) Engine started with push-button ignition switch o ...
Removal and Installation
CAUTION:
Never damage the body panel.
REMOVAL
CAUTION:
Remove center pillar lower garnish. Refer to Removal and Installation.
Pull out tongue of seat belt pre-tensioner retractor from buckle of lap pre-tensioner. Refer to Removal and Installation.
Apply protective tape (A) on center pillar upper gar ...