Nissan Armada 2025-2026 Service and Repair Manual: Additional Service When Replacing Steering Column Control Module
Each function is reset to the following condition when the steering column control module is replaced. For details, refer to Work Procedure.
| Function | Condition | Procedure |
|---|---|---|
| Memory (Steering column) | Erased | Perform memory storing |
Work Procedure
REPLACE DRIVER SEAT CONTROL UNIT
Replace driver seat control unit. Refer to Removal and Installation.
>>
GO TO 2.
Vehicle SPECIFICATION RECOGNITION
Connect battery negative terminal. Power sw ...
Work Procedure
REPLACE STEERING COLUMN CONTROL MODULE
Replace steering column control module. Refer to Removal and Installation.
>>
GO TO 2.
PERFORM THE STEERING COLUMN POSITION LEARNING
Perform the steering ...
Other materials:
Removal and Installation
REMOVAL
Disconnect the battery cable from the negative terminal.
Disengage the fixing pawl on the vehicle front side of the IPDM E/R cover A and then pull up IPDM E/R cover A.
: Pawl
Disengage the fixing pawls on the vehicle rear side of the IPDM E/R cover A and then remove IPDM E/R cover A.
...
ROAD WHEEL : Service Data
ALUMINUM WHEEL
Item Limit Runout Axial runout 0.3 mm (0.012 in) or less Radial runout Allowable unbalance Dynamic (At flange) 5 g (0.17 oz) or less (one side) Static (At flange) 10 g (0.35 oz) or less
ALUMINUM WHEEL (EMERGENCY)
Item Limit Runout Axial runout (Average) 0.3 mm (0.012 ...
Symptom Table
Symptom Check items Cooling system parts malfunction Poor heat transfer Water pump malfunction Worn or loose drive belt — Multi-way control valve stuck closed — Damaged fins Dust contamination or paper clogging Physical damage Clogged radiator cooling tube Excess foreign material ( ...
0.0053