Nissan Armada 2025-2026 Service and Repair Manual: Additional Service When Replacing Transfer Control Unit
When replacing transfer control unit, the following work is required. For the work procedure, refer to Work Procedure.
WORK AFTER REPLACEMENT
Unit parameter writing
Initial calibration
Diagnostic Work Sheet
Description
In general, customers have their own criteria for a problem. Therefore, it is important to understand the symptom and status well enough by asking the customer about his/her concerns caref ...
Work Procedure
WRITING THE REQUIRED INFORMATION FOR CONTROL UNIT REPLACEMENT
With CONSULT
Ignition switch ON.
Select "AWD/4WD".
Select "Replace ECU".
Perform the work according to the procedure displayed in CONSULT. ...
Other materials:
Work Procedure
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the display unit. For details the operation, refer to "CONSULT Operation Manual".
Work Procedure [Display Unit]
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specificat ...
Brake Pedal
Unit: mm (in)
Item Standard Brake pedal height 157.9 – 167.9 (6.22 – 6.61) Depressed brake pedal height
[Depressing 490 N (50 kg, 110 lb) while engine ON] 145.0 (5.71) or more Clearance between stop lamp switch mounting bracket and the brake pedal lever 14.0 – 18.0 (0.55 – 0.71) Brak ...
Engine Oils
Prolonged and repeated contact with used engine oil may cause skin cancer. Try to avoid direct skin contact with used oil.
If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible.
HEALTH PROTECTION PRECAUTIONS
Avoid prolonged and repeated contact with oils, particular ...
0.0059