Exploded View

![]() |
Instrument finisher B | ![]() |
Advanced ambient light (instrument panel passenger side) | ![]() |
Indirect light RH |
![]() |
: Pawl | ||||
| : vehicle front | |||||
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
REMOVAL
Remove instrument pad B. Refer to Removal and Installation.
Disconnect harness connector.
Remove indirect light RH fixing screws
, and then remove indirect light RH.

Disengage advanced ambient light (instrument panel passenger side) fixing pawls using a remover tool (A), and then remove advanced ambient light (instrument panel passenger side).

![]() |
: Pawl |
INSTALLATION
Install in the reverse order of removal.
Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
-
Replacement of bulb is not possible due to the adoption of LED. When replacement, replace advanced ambient light (instrument panel passenger side) as a single part. Refer to Removal and Installation.
Other materials
Noise, Vibration and Harshness (nvh) Troubleshooting
NVH Troubleshooting Chart
Use chart below to find the cause of the symptom. If necessary, repair or replace these parts. Possible cause and suspected parts SYMPTOM Reference
Noise Shake Vibration Shimmy Judder Poor quality ride or handling
Improper installation, looseness
×
×
×
...
Off Road Models
Exploded View
Front bumper side bracket RH
Front bumper side retainer RH
Front bumper retainer upper
Front bumper side stay RH
Front bumper reinforcement
Front bumper energy absorber A
Front bumper energy absorber B RH
Front bumper energy absorber C RH
Front bumper energy a ...
Front Door Outside Molding
Removal and Installation
REMOVALCAUTION:
Never damage the front door panel.Fully open front door glass.
Remove door mirror assembly. Refer to Removal and Installation.
Apply protective tape (A) on the part to protect it from damage.
Disengage front door outside molding fixing pawl using remover to ...



