Removal and Installation
REMOVAL
CAUTION:
Never damage the front door panel.
Fully open front door glass.
Remove door mirror assembly. Refer to Removal and Installation.
Apply protective tape (A) on the part to protect it from damage.
Disengage front door outside molding fixing pawl using remover tool (A) and (B).
CAUTION:
Never lift front door outside molding with excessive force to prevent damage to the part.
 |
: Pawl |
Twist front door outside molding toward the direction of arrow in the figure, and then lift up and remove it.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
When installing front door outside molding, it must take account of the mating surface with the front door sash cover.
Other materials
Steering Telescopic
Diagnosis Procedure
CHECK MANUAL OPERATION
Check manual operation.
Does it operate normally?
YES>>
GO TO 2.
NO>>
Refer to Diagnosis Procedure.
CHECK TELESCOPIC SENSOR
Check telescopic sensor. Refer to Component Function Check.
Is the inspection result normal?
YES>>
Check intermi ...
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...
Additional Service When Replacing Bcm
Description
CAUTION:
When replacing the BCM, always replace it with a new one. The functions controlled by the BCM does not operate properly in case of reuse of the BCM from another vehicle.
When before pairing of BCM and Intelligent Key unit, always writing the BCM configuration. Or not doing s ...