Exploded View
 |
Clip A |  |
Air breather tube |  |
Clip B |
 |
Air breather hose A |  |
Clip C |  |
Clip D |
 |
Hose connector |  |
Air breather hose B |  |
Bracket |
 |
Clip E |  |
Hose clamp |  |
Air breather |
 |
Rear final drive assembly | ||||
| : vehicle front | |||||
 : N·m (kg-m, in-lb) |
|||||
 : Always replace after every disassembly. |
|||||
Removal and Installation
WARNING:
-
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
REMOVAL
Remove the hose clamp and separate air breather hose B from air breather .
Remove clip E from bracket .
Remove bracket mounting bolt (
) and remove bracket .
Remove clip D from body frame .
Remove clip C from body frame .
Remove air breather hose A from air breather tube .
Remove air breather hose assembly.
Remove clip B from bracket .
Remove clip A from bracket and remove air breather tube.
Separate each component part.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
For non-reusable parts, refer to Exploded View.
-
When inserting air breather hose A to air breather tube, align the paint mark
of air breather hose A with the paint mark 
of breather tube.
-
When inserting air breather hose to hose connector
, be sure to insert it fully until its end reaches the stop.CAUTION:
Align paint mark
on each air breather hose.
-
When installing air breather to final drive assembly, Install air breather so that the paint mark
on it faced forward of the vehicle.
: vehicle front -
When inserting air breather hose B into the air breather, align paint mark
on air breather hose B and tab on the hose clamp with the paint mark on the air breather.
Other materials
System temporarily unavailable
Condition A:
In the Nissan Armada, the LDW and I-LI warning and assist features may be temporarily
unavailable under specific operating conditions. These systems are designed to function
only when appropriate driving parameters are met.
When the turn signal is activated and the Nissan Armad ...
Refrigerant
Description
CONNECTION OF SERVICE TOOLS AND EQUIPMENTBe certain to follow the manufacturer’s instructions for connecting to the machine.
Leak Test
CHECK REFRIGERANT LEAKAGE USING ELECTRICAL LEAK DETECTORWARNING:
Never check refrigerant leakage while the engine is running.CAUTION:
Be careful of the ...
A/c Compressor
Exploded View
A/C compressor
: N·m (kg-m, ft-lb)
Removal and Installation
WARNING:
Jacking up or lifting up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the ...