Removal and Installation
REMOVAL
Remove instrument pad A. Refer to Removal and Installation.
Remove switch bracket fixing screws 
, and then remove switch bracket 
.
Disengage automatic back door switch fixing pawls using a remover tool (A), and then remove automatic back door switch from the switch bracket.
 |
: Pawl |
INSTALLATION
Install in the reverse order of removal.
Other materials
Vehicle identification
Vehicle Identification Number (VIN) plate
The VIN plate on your Nissan Armada is mounted as shown and serves as the primary
identifier for the vehicle. This number is essential for registration, insurance,
and service records.
Vehicle identification number (chassis number)
The chassis ...
Transfer Control Actuator
Exploded View
Transfer assembly
Transfer control actuator
bracket
: N·m (kg-m, in-lb)
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer t ...
Additional Service When Replacing Bcm
Description
CAUTION:
When replacing the BCM, always replace it with a new one. The functions controlled by the BCM does not operate properly in case of reuse of the BCM from another vehicle.
When before pairing of BCM and Intelligent Key unit, always writing the BCM configuration. Or not doing s ...