Removal and Installation
REMOVAL
Remove back door assembly. Refer to Removal and Installation.
Remove back door hinge mounting nuts, and then remove back door hinge.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Before installation, apply anticorrosive agent onto mounting surface.
-
When installation, perform the fitting adjustment. Refer to Adjustment.
-
After installation, check the open/close operation. Refer to Inspection.
-
After tightening, apply touch-up paint (the body color) if the paint around hinge and mounting nuts are peeled off during adjustment.
-
After installation, apply anticorrosive around the nuts to prevent rust.
Other materials
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...
Additional Service When Replacing Sonar Control Unit
Description
CAUTION:
When replacing the sonar control unit, always replace it with a new one. Sonar system does not operate properly in case of reuse of the sonar control unit from another vehicle.
When before writing the sonar control unit configuration, always writing the MAC key.
Perform the ...
Hd Map Module
Exploded View
Front camera unit
HD map module
: N·m (kg-m, in-lb)
Removal and Installation
REMOVALRemove luggage side lower finisher LH. Refer to Removal and Installation.
Remove front camera unit. Refer to Removal and Installation.
Disconnect HD map module harness connectors from HD ...