CAUTION:
When the following operations are performed, always use CONSULT, for performing each air bleding of “WORK SUPPORT”. Refer to Work Procedure.
Work Procedure
Work ProcedureRefilling
WARNING:
REFILLING (FOR COOLANT REFILL TOOL)
WARNING:
CAUTION:
Check the tightening condition of hose clamp, drain plug, and others.
Do not start engine when reservoir tank does not contain engine coolant.
Close drain plug.
Set the coolant refill tool [SST:KV991J0070(NI-45695-A)] to the reservo ...
Inspection
INSPECTION AFTER REMOVAL
When turn the shaft in direction , check returning to direction by spring power.
CAUTION:
The maximum turning force shall be 5 N·m (0.51 kg-m, 44 in-lb).
When turn the shaft in direction , check locking the shaft. INSPECTION AFTER INSTALLATION
ADJUSTMENT AFTER INSTALLATIO ...
NVH Troubleshooting Chart
SUSPECTED PARTS
(Possible cause) Symptom Reference Transfer fluid leakage Noise TRANSFER FLUID (Level low) 1 Inspection TRANSFER FLUID (Wrong) 4 2 TRANSFER FLUID (Level too high) 1 LIQUID GASKET (Damaged) 2 Exploded View OIL SEAL (Worn or damaged) 2 Front oil seal: Exploded View
Rea ...