SUSPECTED PARTS (Possible cause) | Symptom | Reference | |
|---|---|---|---|
| Transfer fluid leakage | Noise | ||
| TRANSFER FLUID (Level low) | 1 | Inspection | |
| TRANSFER FLUID (Wrong) | 4 | 2 | |
| TRANSFER FLUID (Level too high) | 1 | ||
| LIQUID GASKET (Damaged) | 2 | Exploded View | |
| OIL SEAL (Worn or damaged) | 2 | Front oil seal: Exploded View Rear oil seal: Exploded View Input oil seal: Exploded View | |
| GEAR (Worn or damaged) | 3 | — | |
| BEARING (Worn or damaged) | 3 | — | |
| TRANSFER CASE (Damaged) | 3 | 3 | — |
NOTE:
When transfer inner parts are malfunction, replace transfer assembly.
Clamps
Generally speaking, when a body has to be straightened, the pulling device and the body must be attached to each other and the body itself must remain stationary. For this purpose, various clamps are used.
Common types of clamps and their characteristics are listed below:
DIRECTIONAL CHARACTERISTICS ...
Work Procedure
STEP 1
Select “AUTOMATIC BACK DOOR” using CONSULT.
Select “Reset auto back door status” of “WORK SUPPORT” mode.
Touch “Initialize” to erase automatic back door position information.
>>
GO TO 2.
STEP 2
Fully close the back door manually.
>>
GO TO 3.
STEP 3
Operate bac ...
Steering Gear and Linkage
Item Standard
: Gear housing end
: Inner socket end Rack stroke neutral position (C) 27.5 mm (1.083 in) Rack stroke full stroke position (C) 154 mm (6.06 in) Outer socket ball joint Swing force* (Spring balance measurement) 14.0 – 40.6 N (1.43 – 4.14 kgf, 3.15 – 9.12 lbf) Ball joint ...