Body Center MarksRemoval and Installation
REMOVAL
Disengage fixing pawls using a remover tool (A) according to numerical order 1 → 2 indicated by arrows as shown in figure, and then remove sliding switch knob.
: Pawl
Disengage fixing pawls using a remover tool (A), and then remove reclining switch knob.
: Pawl
Remove outside seat cu ...
Inspection
WARNING:
OIL LEAKAGE
Make sure that oil is not leaking from final drive assembly or around it.
OIL LEVEL
CAUTION:
The ignition switch OFF while checking oil level.
Set a gasket on filler plug and install it on final drive assembly.
CAUTION:
Never reuse gasket.
Tighten filler plug to the specified ...
SRT Set Driving Pattern
CAUTION:
Always drive the vehicle in safe manner according to traffic conditions and obey all traffic laws.
*1: Depress the accelerator pedal until vehicle speed is 90 km/h (56 MPH), then release the accelerator pedal and keep it released for more than 10 seconds. Depress the accelerator pedal until ...