WARNING:
OIL LEAKAGE
Make sure that oil is not leaking from final drive assembly or around it.
OIL LEVEL

CAUTION:
The ignition switch OFF while checking oil level.
Set a gasket on filler plug and install it on final drive assembly.
CAUTION:
Never reuse gasket.
Tighten filler plug to the specified torque. Refer to Exploded View.
DrainingProtector and Equipment
(1) DUSTPROOF RESPIRATOR
This is an important protector to prevent workers from inhaling dust.
The cup type, gauze type, and other types of respirators are available.
The respirators with the deodorizing function which utilizes activated carbons, or with the exhaust valve to release air can be selec ...
Additional Service When Replacing Ecm
Performing the following procedure can automatically activate recommunication of ECM and Intelligent Key unit, but only when the ECM is replaced with a new one*. For details, refer to Work Procedure.
*: New one means a virgin ECM that has never been energized on-board.
(In this step, initialization ...
Exploded View
Radiator Condenser outlet pipe O-ring Condenser & liquid tank assembly Condenser seal Refrigerant pressure sensor Condenser inlet pipe : Pawl : Always replace after every disassembly. : N·m (kg-m, in-lb) , , : Indicates that the part is connected at points with same symbol in actual v ...