WARNING:
The following figure shows the areas that are sealed at the factory. Sealant that is applied to these areas should be smooth and free from cuts or gaps. Care should be taken not to apply an excess amount of sealant and not to allow other unaffected parts to come into contact with the sealant.

: Sealed portions |

: Sealed portions |

: Sealed portions |

: Sealed portions |
Stone Guard Coat
Body ConstructionWork Procedure
SYSTEM INITIALIZATION
NOTE:
System initialization is required for each seat.
System initialization can perform by power window main switch or power window switch on each seat.
Close the door.
Ignition switch ON.
Operate power window switch UP, and then release the switch after door glass to the ful ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Hood
1. To open the hood of the Nissan Armada, pull the hood release handle 1 located
beneath the driver’s side instrument panel. This action will cause the hood to pop
up slightly.
2. Move to the front of the Nissan Armada and locate the secondary safety lever
2. Slide it sideways with your ...