Description
Both side headlamps (HI) are not turned ON when setting to the lighting switch HI or PASS.
Diagnosis Procedure
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to Symptom Table.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning part.
CHECK HIGH BEAM REQUEST SIGNAL
With CONSULT
-
Select “High beam request” in “Data Monitor” mode of “IPDM E/R” using CONSULT.
-
With operating the lighting switch, check the monitor status.
Monitor item Condition Monitor status High beam request Lighting switch
(2ND)HI On LO Off
Is the inspection result normal?
YES>>Replace IPDM E/R. Refer to Removal and Installation.
NO>>Replace BCM. Refer to Removal and Installation.
Other materials
Wheel Sensor
Front Wheel Sensor
Exploded View
Front LH wheel sensor
Bracket
Steering knuckle
: vehicle front
: N·m (kg-m, in-lb)
NOTE:
Front RH wheel sensor is symmetrically opposite of LH.
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle he ...
Radiator Core Support
Exploded View
Radiator air guide upper
Radiator core support
Radiator air guide RH
Radiator air guide lower
Radiator air guide LH
: N·m (kg-m, ft-lb)
...
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM
Get the detailed information about symptom from customer.
Check the drive mode indicator on the meter appeared.
Check the drive mode indicator on the meter changed when operates the drive mode selector switch.
>>
GO T ...