Both side headlamps (LO) are not turned ON in any condition.
Diagnosis Procedure
Diagnosis ProcedureWork Procedure
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the display unit. For details the operation, refer to "CONSULT Operation Manual".
Work Procedure [Display Unit]
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specificat ...
Commercial Service Tool
Tool name
Description Power tool
Loosening bolts and nuts Transmission jack
Removing transmission assembly Support bar
Removing transmission assembly 1/2" Disconnect tool
Removing A/T fluid cooler hoses
*: Always check with the Parts Department for the latest parts information. ...
Removal and Installation
WARNING:
REMOVAL
Ignition coil
NOTE:
No. 2-No. 5 can be removed using only the ignition coil.
Remove engine cover. Refer to Removal and Installation.
Remove mounting bolt from air inlet tube 1 . (No. 1 and No. 6 cylinder)
: Vehicle front
Remove mounting bolt from air inlet tube 1 . (No. 1 and ...