Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure

Nissan Armada 2025-2026 Service and Repair Manual / Brakes / Brake Control System — With Vdc / Basic Inspection / Work Procedure

PERFORM INITIALIZATION POSITION ADJUSTMENT

Select "ABS", "Work support", and "Initialization position adjustment" according to this order.

CAUTION:
Touch "START".

GO TO 2.

PERFORM THE SELF-DIAGNOSIS

With CONSULT

Ignition switch OFF (Auto ACC function OFF) to ON.
Erase self-diagnosis results memory of "ABS".
Pull parking brake switch to activate electric parking brake.
Push parking brake switch to release electric parking brake.
Perform self-diagnosis for “ABS”.

Is malfunction detected?

YES>>

Check the DTC. Refer to DTC Index.

NO>>

INSPECTION END

Adjustment of Brake Caliper Initial Position

CAUTION: When performing the following operations, always use CONSULT (It cannot be performed by any means other than CONSULT.), for performing "Initialization position adjustment" of "Work support". ...

Change of System Mode

CAUTION: When the following operations are performed, always use CONSULT, for performing "System mode change" of "Work support". Refer to Work Procedure. ×: Required —: not required Procedure S ...

Other materials:

Removal and Installation
REMOVAL Remove fuel filler base assembly. Refer to Removal and Installation. Rotate and disengage fuel filler lid lock assembly fixing pawls according to the numerical order 1→2 indicated by arrows as shown in the figure, and then remove fuel filler lid lock assembly. : Pawl : Vehicle front ...

Exploded View
Cylinder body Inner shim cover Inner shim Inner pad (with pad wear sensor) Return spring Pad retainer Torque member Outer pad Outer shim Outer shim cover : Vehicle front 1: Apply MOLYKOTE® AS880N or siliconebased grease. 2: Apply MOLYKOTE® 7439 or equivalent. : N·m (kg-m, ft-lb) Molyk ...

Removal and Installation
WARNING: REMOVAL Disconnect the negative battery terminal. Refer to Removal and Installation. Drain A/T fluid. Refer to Draining. Remove oil pan mounting bolts () and then remove oil pan . CAUTION: Never reuse bolts. NOTE: To avoid damage to the vehicle, do not remove the magnets from the oil pan. ...

0.0049