Symptom TableDiagnosis Procedure
Fuel gauge will not indicate from a certain position.
CONDUCTING THE COMBINATION METER SELF-DIAGNOSIS MODE
Perform the self-diagnosis mode of combination meter, and then check that the fuel gauge operates normally. Refer to On Board Diagnosis Function.
Is the inspection result normal?
YES>>
...
Hammering
Elongation of aluminum alloy during hammering will be greater than with steel plates. Therefore, a wooden or plastic hammer should be used with a softer blow to prevent stretching and work hardening of panels. Observe the following in case body filler is applied after hammering.
Apply wash primer a ...
Exploded View
Crash zone sensor Radiator core support lower : Vehicle front : Always replace after every disassembly. : N·m (kg-m, ft-lb) ...