| Symptom | Reference |
|---|---|
| Over-discharged 12V battery | Refer to Work Flow (With EXP-800 NI or GR8-1200 NI) or Work Flow (Without EXP-800 NI and GR8-1200 NI). |
Charging SystemRemoval and Installation
REMOVAL
Remove the door mirror finisher. Refer to Disassembly and Assembly.
Remove the side camera mounting screw , and then remove the side camera .
INSTALLATION
Install in the reverse order of removal.
Perform parameter writing. (With ProPILOT Assist 2.1) Refer to Work Procedure.
Perform camera ...
Diagnosis Procedure
CHECK HEAD UP DISPLAY MAIN SWITCH OPERATION
With CONSULT
Turn ignition switch ON.
Select "Main switch" in "Data Monitor" mode of "Head Up Display” using CONSULT.
Check "Main switch" indication as per the following condition.
Monitor item Condition Indication Main switch Head Up Display main ...
Exploded View
Grommet Front pillar finisher Double-sided tape
[t: 2.5 mm (0.098 in)] : Clip : Always replace after every disassembly. ...