| Tool name | Description | |
|---|---|---|
| Power tool |
| Loosening nuts and bolts |
| Spark plug wrench |
| Removing and installing spark plug a: 14 mm (0.55 in) |
| Radiator cap tester |
| Checking radiator and radiator cap (reservoir tank cap) |
| Radiator cap tester adapter |
| Adapting radiator cap tester to radiator cap (reservoir tank cap) and water inlet filler neck a: 28 (1.10) dia. b: 31.4 (1.236) dia. c: 41.3 (1.626) dia. Unit: mm (in) |
Special Service ToolFlushing
WARNING:
Install reservoir tank if removed, and radiator drain plug.
CAUTION:
Be sure to clean drain plug and install with new O-ring.
Tightening torque Refer to RADIATOR : Exploded View.
If water drain plug on cylinder block is removed, close and tighten it. Refer to Setting.
Fill radiator and ...
Engine Compartment
WARNING:
MEASUREMENT
Dimensions marked with ″″ indicate symmetrically identical dimensions on both the right and left hand of the vehicle.
Unit: mm (in)
Unit: mm (in)
«The others» Point Dimension Memo Point Dimension Memo Point Dimension Memo – 833 (32.80) – 1653 (65.08) – ...
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK DTC
Check DTC.
Perform the following procedure if DTC is detected.
Record DTC and freeze frame data (Print them out using CONSULT.)
Erase DTC.
Ar ...