Nissan Armada 2025-2026 Service and Repair Manual: Commercial Service Tools
| Tool name | Description | |
|---|---|---|
| Preload gauge |
| Inspecting steering column rotating torque, pinion rotating torque and ball joint rotating torque |
| Power tool |
| Loosening nuts, screws and bolts |
Special Service Tools
The actual shape of the tools may differ from those illustrated here.Tool number
(TechMate No.)
Tool name Description  — 
(NI-44372)
Pull gauge
Measuring steering wheel turning force and bal ...
Sealant or/and Lubricant
Name Description RheoGel TEK676 Boot ...
Other materials:
Removal and Installation
Release the lock knob at the back of the Intelligent Key and remove the mechanical key.
Insert remover tool (A) wrapped with a cloth into the slit 1 of the corner and twist 2 it to separate the upper part from the lower part.
CAUTION:
Never touch the circuit board or battery terminal.
The Intellig ...
Exploded View
Final drive mounting bracket Rear final drive assembly Upper stopper Lower stopper Washer : N·m (kg-m, ft-lb) : Always replace after every disassembly. ...
Disassembly and Assembly
DISASSEMBLY
Put a matching mark between propeller shaft and flange yoke as shown.
CAUTION:
For matching mark, use paint. Never damage the surface.
Remove snap rings .
Lightly tap bottom of yoke using a copper hammer and remove journal bearing.
CAUTION:
Never damage the yoke.
Remove grease nipp ...
0.0071