| Tool name | Description | |
|---|---|---|
| Engine ear |
| Locates the noise |
| Power tool |
| Loosening bolts, nuts, and screws |
Special Service ToolsWork Procedure
Perform the following procedures after replacing the around view monitor control unit.
REPLACE AROUND VIEW MONITOR CONTROL UNIT
Replace around view monitor control unit. Refer to Removal and Installation.
>>
GO TO 2.
WRITING MAC KEY
With CONSULT
Perform MAC key writing. Refer to Description. ...
Adjustment
Rear moonroof glass Glass lid Roof panel
NOTE:
Standard of surface height is given assuming that the glass upper side status is (+), and the glass lower side status is (−) relative to the roof panel.
Unit: mm [in]
Portion Standard Roof panel – Rear moonroof glass – E Clearance 6.4 †...
System Initialization
If any of the following operations are performed, the initialization is necessary for normal operation of power window system. Refer to Work Procedure.
When each power window motor replaced.
Power supply to the each power window motor is not cut off properly.
Removal and installation of regulator as ...