Nissan Armada 2025-2026 Service and Repair Manual: Component Inspection (Heated Steering Wheel Relay)
CHECK HEATED STEERING WHEEL RELAY CONTINUITY
Check continuity between heated steering wheel relay terminals.
CAUTION:
Connect the fuse between the terminals when applying the voltage.
| Heated steering wheel relay | Condition | Continuity |
| Terminal | ||
| 3 − 5 | Apply 12 V direct current between terminals 1 and 2. | Existed |
| Other conditions. | Not existed |
Is the inspection result normal?
YES>>INSPECTION END
NO>>Replace heated steering wheel relay. Refer to Component Parts Location.
Diagnosis Procedure
CHECK POWER SOURCE AND GROUND CIRCUIT
Turn ignition switch OFF.
Remove the heated steering wheel. Refer to Removal and Installation.
Turn ignition switch ON.
CAUTION:
Never start the engine.
Turn heat ...
Other materials:
Removal and Installation
REMOVAL
Using a suitable tool, release clips , and remove cover .
Disconnect front camera unit harness connector.
Release pawls of bracket, and remove front camera unit from bracket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not touch or shock the driver assist ...
Removal and Installation
REMOVAL
Place glass mirror upward.
Apply protective tapes (A) on the part to protect it from damage.
Insert remover tool (A) into the recess at between glass mirror and door mirror actuator, and then disengage glass mirror fixing pawls.
CAUTION:
Disengage the fixing pawls slowly so they are not ...
Diagnosis Procedure
CHECK SUNSHADE
Check sunshade for damage, deformation, of interference with other parts.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is executed and operation is confirmed. Re ...
0.0069