Component Function CheckPrecaution Necessary for Steering Wheel Rotation After Battery Disconnect
CAUTION:
Comply with the following cautions to prevent any error and malfunction.
Before removing and installing any control units, first turn the ignition power source and accessory power source to the OFF, then disconnect both battery cables.
After finishing work, confirm that all control unit con ...
Removal and Installation
WARNING:
REMOVAL
CAUTION:
When removing the A/T assembly from engine, first remove the crankshaft position sensor (POS) from the A/T assembly.
Be careful not to damage sensor edge.
When replacing A/T assembly, Perform "ADDITIONAL SERVICE WHEN REPLACING TRANSMISSION ASSEMBLY". Refer to Description.
...
Inspection
INSPECTION PROCERDURE
Trouble Diagnosis of Turbocharger
Check items before trouble diagnosis
Check that the engine oil level is between L (Low level) and H (High level) of the oil level gauge. [When the engine oil amount is more then H (High level), the engine oil flows into the inlet duct through t ...