When repairing a frame deformed by a collision, every body repair technician must always keep in mind that the original frame performance of the vehicle (running performance and anti-collision safety) should be restored so as to offer the maximum customer satisfaction. For that purpose, we hope that every technician reads and understands this manual as well as the Service Manual and the Body Repair Manual so as to repair appropriately and safely. In particular, extreme care must be taken when an oxy-acetylene welder flame is used for repairing a frame deformed by a collision. Careless work on any heated portions without temperature control may result in deterioration of the running performance and anti-collision safety. To prevent such problems, every body repair technician should be aware of the importance of understanding the contents of this manual before frame repair, identifying the frame deformation accurately, and adopting an appropriate repair procedure.
Cut and Butt Joint Weld
Aluminum RepairDiagnosis Procedure
REAPPLY THE PARKING BRAKE (1)
Pull the parking brake switch, and apply the parking brake.
Pull the parking brake switch 2 seconds ore mode.
Is the vehicle moving backward?
YES>>
GO TO 2.
NO>>
NORMAL
PERFORM THE SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “ABS”.
Is any D ...
Exploded View
Circular clip Dust shield Housing Snap ring Ball cage/steel ball/inner race assembly Stopper ring Boot band Boot Shaft Circular clip Joint sub-assembly : Wheel side : Always replace after every disassembly. 1: NISSAN Genuine grease or equivalent. 2: Apply paste [service parts (44003 ...
Starting the engine
Basic information
1. Apply the parking brake.
2. Confirm that the Nissan Armada is in the P (Park) position.
The Intelligent Key must be inside the Nissan Armada when operating the ignition
system.
3. Press the ignition switch to the ON position. Then depress the brake pedal
and press the ig ...