Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the IPDM E/R.
CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the IPDM E/R. For details, refer to Work Procedure.
NOTE:
For details the operation, refer to “CONSULT Operation Manual”.
Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to IPDM E/R according to "Replace ECU" in “CONSULT Operation Manual”.
>>
WORK END
Other materials
Lubricant
Description
MAINTENANCE OF LUBRICANT LEVELThe compressor lubricant is circulating in the system together with the refrigerant. It is necessary to fill A/C compressor with lubricant when replacing A/C system parts or when a large amount of refrigerant leakage is detected. It is important to always ma ...
Kicking Plate
Removal and Installation
CAUTION:
Never damage the body panel.REMOVALFront Kicking PlateDisengage front kicking plate fixing pawls according to numerical order 1→3 indicated by arrows as shown in the figure, and then remove front kicking plate.
: Pawl
: vehicle front
Rear Kicking PlateDise ...
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...