Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Cumulative Battery Discharge Current Clear

Description

CUMULATIVE BATTERY DISCHARGE CURRENT CLEAR is an operation to clear the cumulative value of battery discharge current which is memorized in IPDM E/R. This operation is necessary after replaced the 12V battery. Refer to Work Procedure.

NOTE:

The cumulative battery discharge current value is used for 12V battery inspection.

If the cumulative value is not erased when replacing the battery, the accurate diagnoses cannot be made because it was added to the cumulative value before the battery replacement.

Work Procedure

CLEAR CUMULATIVE BATTERY DISCHARGE CURRENT VALUE

With CONSULT

  1. Ignition switch ON.

  2. Select “Cumulative battery discharge current clear� in “Work support� mode of “IPDM E/R� using CONSULT.

  3. Touch “START� to clear the cumulative value of battery discharge current.

>>

WORK END

    Other materials

    Audible reminders
    Light reminder chime The Nissan Armada emits a light reminder chime if the headlights are left on after the engine has been turned off and the driver’s door is opened. This helps prevent battery discharge. The sound occurs when the switch remains in the or position. To avoid unnecess ...

    LDW system operation
    The Nissan Armada LDW and I-LI systems utilize a forward-facing camera mounted behind the windshield to continuously monitor lane markings and road boundaries. Example I-LI ON indicator (displayed in the vehicle information screen) LDW/I-LI alert indicator (vehicle information displ ...

    Driver Assistance System Tools and Preparation
    Preparation Special Service Tools The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name   Description   — (J-46534) Trim Tool Set Removing trim components — (1–20–2851–1) ICC alignment kit* Uses for radar alignme ...