NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Configuration (a/c Auto Amp.)

Nissan Armada 2025-2026 Service and Repair Manual / Ventilation, Heater & Air Conditioner / Heater & Air Conditioning Control System / Configuration (a/c Auto Amp.)

Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing the A/C auto amp.

The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the A/C auto amp.

Refer to Work Procedure.

NOTE:

For details the network connection and operation, refer to “CONSULT Operation Manual”.

The configuration no need to “save” configuration data from the A/C auto amp. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.

CAUTION:

  • Complete the procedure of “Configuration” in order.

  • If incorrect “Configuration”, incidents might occur.

Work Procedure

WRITING VEHICLE SPECIFICATION

With CONSULT

Perform writing vehicle specification to A/C auto amp. following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.

NOTE:

  • Log in the network according to CONSULT guidance.

  • For details the network connection and operation, refer to “CONSULT Operation Manual”.

>>

WORK END

    Other materials

    Air Cleaner and Air Duct
    Exploded View * When removing the crankcase ventilation valve exchange as a set. Removal and Installation WARNING: Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacki ...

    Front Door Striker
    Removal and Installation REMOVALRemove TORX bolts, and then remove front door striker.INSTALLATIONNote the following items, and then install in the reverse order of removal.CAUTION: Never reuse TORX bolt. Always replace it with a new one when it is removed. Before tighten front door striker moun ...

    Rear Bumper
    Removal and Installation REMOVALRemove rear bumper energy absorber. Refer to Removal and Installation. Remove harness clip . Disconnect outside key antenna (rear bumper) harness connector. Remove outside key antenna (rear bumper) fixing nuts , and then remove outside key antenna (rear bumper) . INS ...